A clutch master cylinder and slave cylinder are important for the proper functioning of the car. If they are not working properly, you will need a clutch master cylinder and slave cylinder replacement.
What is a Clutch Master Cylinder and Slave Cylinder?
The pressure required to move the clutch comes from the brake fluid or clutch fluid that’s stored inside the clutch master cylinder. This fluid travels from the master cylinder to the slave cylinder through hoses when the clutch is pressed.
Both the cylinders are covered with internal and external seals. And if the external seal wears out or breaks, the brake fluid will leak out of the master cylinder making it difficult for the driver to shift gears. And if the internal seal breaks, the clutch fluid won’t reach the slave cylinder making the clutch pedal go all the way down when it’s pressed.
Why is Clutch Master Cylinder and Slave Cylinder Replacement Needed?
The clutch master cylinder stores the clutch fluid or brake fluid. When the clutch is pressed, the fluid flows from the master cylinder to the slave cylinder causing the gears to move. A faulty clutch master cylinder can cause the clutch to malfunction. A malfunctioning clutch makes it difficult to drive the car.
A faulty clutch master cylinder is often followed by a faulty slave cylinder. Therefore, whenever you replace the master cylinder, you should also replace the slave cylinder.
Suggested for you: Centre Support Bearing Replacement Service
What are the Signs that the Clutch Master Cylinder and Slave Cylinder need Replacement?
When you press the clutch pedal, if it goes all the way down to the floor, it is an indication that the slave cylinder is failing. Alternatively, if you notice the brake fluid leaking around the clutch pedal, that means a faulty clutch master cylinder. Difficulty in shifting gears is also an indication that it is time to replace the master cylinder.
How is it Done?
When you take your car to a mechanic for clutch master cylinder and slave master replacement service, it’s done in the following manner.
- The mechanic inspects the clutch master cylinder and the slave cylinder
- He/she checks the level of brake fluid
- The clutch pedal is pressed to check its operation
- If the mechanic finds any fault, the clutch master cylinder and slave cylinder and removed
- The new clutch master cylinder and slave cylinder is installed and all the air is taken out of the master cylinder
- The car is road tested
Get your clutch master cylinder and slave cylinder checked every time you take your car for servicing. If your clutch pedal isn’t properly working, you should consult an expert mechanic for the clutch master cylinder and slave cylinder replacement. You can post a request on Swezo to get quotes from top mechanics near you.